Appliance Removal
I have hauled out more refrigerators, washers, and water heaters than I can count, and the same handful of problems show up on nearly every job. Appliance removal looks simple until you are standing in a basement stairwell with 250 pounds of steel and a four-inch turning radius. This article covers what I check before I touch anything, what it costs in time and money, and where people go wrong.
Start by Measuring the Path, Not the Appliance
Most people measure the appliance. I measure the route it has to travel. A standard top-freezer refrigerator is about 30 inches wide, but the door frame it came through might be 32 inches with the hinges on. Take the doors off and you gain two inches, but only if you can reach the hinge pins.
For a closer look at junk removal, the page linked here covers the details.
Walk the route from the appliance to the truck and note every turn, step, threshold, and low ceiling. A basement washer that went in before the stair framing was finished can be a real puzzle on the way out. I have taken a stair railing off more than once, and I have taken a door off its hinges on about a third of jobs. Plan for that, and bring a drill, a socket set, and a pry bar.
Also check the floor. Hardwood, vinyl plank, and old linoleum all tear under the edge of a dolly. I lay down cardboard or thin hardboard runners, which cost a few dollars and save a repair bill that can reach hundreds.
Disconnect Everything Properly
The disconnect is where an easy job turns into a flooded kitchen. Each appliance type has its own routine.
For a washing machine, shut off both supply valves, unscrew the hoses, and let them drain into a bucket. Expect a quart or two to come out of each hose. Tip the machine slightly to drain the pump. For a dishwasher, you need to disconnect the water supply under the sink, the drain line, and the electrical connection, which is often hardwired. Turn off the breaker and confirm with a tester before you touch a wire cap.
Electric dryers use a 240-volt cord or hardwired lead, so the breaker comes first. Gas dryers and gas ranges are different. If you are not confident closing a gas line and capping it, call a licensed plumber or the gas utility. A loose cap is not a place to learn. I have walked away from jobs where the shutoff valve was seized, because forcing it was the wrong move.

Water heaters are the messiest. Turn off the power or gas, close the cold supply, and attach a hose to the drain valve. A 40-gallon tank takes 20 to 40 minutes to drain, and the first water out can be scalding if the unit was recently running. Let it cool overnight if you can.
Deal With Refrigerants and Hazardous Parts
Refrigerators, freezers, window air conditioners, and dehumidifiers contain refrigerant that must be recovered by a certified technician before the unit is scrapped. Venting it is illegal under federal rules, and fines are real. Do not cut into the coil lines or crush a unit to save space.
Many scrap yards and recyclers will take a unit only with a tag stating the refrigerant has been removed. If you are doing the hauling yourself, ask the recycler on the phone what paperwork they want. Some charge a fee of $15 to $50 per unit for refrigerant handling, and some take it free if the compressor is intact.
Older appliances can have other surprises. Pre-2000 refrigerators may have mercury switches in the door light or chest freezer lid. Some old units have foam insulation with blowing agents that need special handling. Fluorescent bulbs, capacitors, and oil in compressors all have rules. If a unit is old enough that you do not know what is in it, assume the recycler will want to look it over.
Know Your Disposal Options and What They Cost
There are four realistic routes, and each has a trade-off.
Utility rebate programs are worth checking first. Many electric utilities pay $25 to $75 to pick up a working, older secondhand refrigerator or freezer, because it saves them energy on the grid. The catch is scheduling, since pickup windows can be a week or two out, and the unit usually has to be running and empty.
Scrap yards pay by weight for steel, but the price swings. A washer or dryer might fetch $10 to $25 in scrap value, which rarely covers gas and your time. Refrigerators fetch less because of the recovery requirement.
Retailer haul-away is the easiest route when you buy a new appliance. Most stores charge $25 to $80 per old unit, and they will often take it the same day as delivery. Ask about it when you place the order, not when the truck arrives, because some delivery crews will not disconnect or carry anything out unless it was arranged in advance.
Hiring a hauler is the right move when you have several items, a tight stairwell, or no truck. If the appliance is part of a larger cleanout, a full-service junk removal crew can take it along with furniture and debris in one visit, which is usually cheaper than paying for each piece separately. Pricing normally depends on volume and how much labor the job takes, so get a quote that includes stairs and disconnects.
Donate or Sell Working Units
A working appliance under about ten years old often has a home. Habitat-style resale stores, local charities, and neighborhood groups take refrigerators, washers, and ranges in good condition. Ask whether they pick up, since many do for free and some require a photo or model number first.
Selling online works if you price it honestly. A 6-year-old washer in good shape might bring $100 to $200, but buyers will want to see it running. Clean it, take the photos with doors open, and note the model number. Be clear that the buyer handles pickup. I have seen sellers lose a full day to no-shows, so I ask for a message confirmation the evening before.
If the unit is broken, say so, and sell it for parts or scrap. Honest listings avoid the argument at the doorstep.
Lift Safely or Don't Lift at All
Refrigerators and washers are top-heavy and they shift. A two-wheel appliance dolly with a strap is the baseline. Use a stair-climbing dolly or a ramp if there are more than four or five steps. Strap the door shut or tape it, because a door swinging open mid-carry can pull you off balance.
Do not tilt a refrigerator past 45 degrees, and keep it upright in the truck if you can. Laid down, oil can drain from the compressor into the cooling lines, and a working unit may need to sit upright for several hours before it is plugged in again. For scrap, this matters less.
Two people is the minimum for anything over 100 pounds. A typical washer is 150 to 200 pounds, a gas range is 150, and a big side-by-side fridge can pass 300. Back injuries from appliance moves are among the most common I hear about, and almost all of them involve someone deciding to do it alone.
Mistakes I See Over and Over
The first mistake is skipping the measurement of the route. The second is forgetting to empty the unit. Food, water, and loose shelves all add weight and mess, and a full freezer sitting in a hot truck is a smell you will not forget. Empty and defrost a freezer at least 24 hours ahead, and lay towels underneath.
The third is disconnecting gas without the right shutoff or fittings. The fourth is leaving the old appliance on the curb with no plan. Many municipalities do not pick up appliances with regular trash, and some require a tag, an appointment, or a refrigerant sticker. Abandoned units can bring a fine, and they are an easy way to annoy neighbors.
The fifth is underestimating the time. A first-floor dryer swap can be done in 30 minutes. A basement water heater with a seized valve and a narrow stair can take three hours.
A Simple Plan That Works
Here is the order I follow. Check the route and measure. Confirm how the unit will be disposed of and what paperwork is needed. Empty, drain, and disconnect with the power and water off. Protect the floors and the walls. Lift with two people and the right dolly. Deliver to the recycler, charity, or hauler the same day, so the unit does not sit in a garage for a month.
Done in that order, appliance removal is a manageable half-day task. Done out of order, it becomes a repair bill, a fine, or a hospital visit. Take the extra twenty minutes up front, and the rest of the job goes the way you planned.